Re: BigKev's 1954 Packard Clipper Deluxe Sedan
Posted by BigKev On 2009/2/10 22:52:06
Well a couple updates this evening. I managed to get the rebuilt waterpump (exchange) from Kanter bolted up to the block. I also media blasted the PS Steering crank pulley, and got that into primer.
I just need to paint the PS pulley and the water-pump the same color as the engine color. I also need to remove the crank pulley bolt to attach the PS Steering Pulley add on. I ran a tap through the holes in the dampner to clear them up as the PS Pulley bolts to those in addition to the crank bolt.
Attach file:
(21.01 KB)
(72.16 KB)
I just need to paint the PS pulley and the water-pump the same color as the engine color. I also need to remove the crank pulley bolt to attach the PS Steering Pulley add on. I ran a tap through the holes in the dampner to clear them up as the PS Pulley bolts to those in addition to the crank bolt.
Attach file:
(21.01 KB)
(72.16 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=21794