Re: BigKev's 1954 Packard Clipper Deluxe Sedan

Posted by BigKev On 2009/2/11 23:13:03

All very creative ways. I ended up doing it Howards way as that was the first one I read, and then I was off into the garage to give it a try. I just clamped a spare belt tight around the pulley, and wedged the other end of the belt with a pry bar between the frame and the block. Photo says it all, bolt torqued to 135 ft/lbs.

Attach file:

---

  (73.09 KB)