Re: Wes's Maroon 1947 Custom Super Clipper

Posted by Wesley Boyer On 2020/7/18 20:32:08

Correct again Howard, by just moving the seat back gave me enough room to slide under the Steering Wheel. Now with both sides rewired and all the wires connected up correctly and loosing about five pounds of sweat. I found my Directional Switch only works for Right Hand turns. Well I was planing on taking out the Steering Column and cleaning it up along with realigning the Shift Linkage. So for now I'm leaving the wiring to the headlights as is and look into adding the power relays at a later time. The easiest way to check the Directional Signal Switch is to run a jumper from L on the back of the Flasher to one of the two junction blocks and that will simulate the switch being activated.
Wes