Re: Stewart's 1955 Packard 400

Posted by Marty or Marston On 2020/8/14 9:50:51

Looking at the inside of your car, if it were mine, I would get it sand blasted. Then seal around all the seams that sandblasting could not get to with a urethane caulking compound. Next I would spray (2 coats) or brush (1 coat) on Rust-Oleum. Install the stuff I mentioned above.

If the body is off the frame, I would sand blast it use Rust-Oleum primer and then paint with a good chassis paint (Try TCP Global).