just to be safe I chose to use a modern rock and hammer..my friends press. took a couple of hours but they are straight now. a couple more issues, the compensator lever has twisted, but have another one on the way. (thanks Mike) and there is a crack in the top of the housing, can it just be repaired with a little JB weld as it is not pressurized? or should I look for a new top pc?
also has anyone tried the permatex liquid tape to seal the compensator switches? multiple layers and still stays flexible? so they say. the switches tested ok for continuity, no power when switch depressed correct?
Attach file:
(241.92 KB)
(245.96 KB)
(303.58 KB)
(186.80 KB)
(194.43 KB)
(245.96 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=228486