Re: KPack's 1954 Panama
Posted by Packard Don On 2020/12/15 12:10:38
The seam where you pointed out the leak is where fuel might come out if the fitting isn't tight or if the flare is somehow not seating properly into the fitting. It could also indicate a crack at the tube's flare although that's not too likely.
On the choke, one arm inside appears to have been bent over and as that parts is swedged to the shaft, it cannot be replaced. You can try to carefully straighten it but it may break. The tab marked should point straight outward with the area below it being flat.
Attach file:
(92.69 KB)
On the choke, one arm inside appears to have been bent over and as that parts is swedged to the shaft, it cannot be replaced. You can try to carefully straighten it but it may break. The tab marked should point straight outward with the area below it being flat.
Attach file:
(92.69 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=228870