Re: KPack
Posted by kevinpackard On 2021/4/8 10:51:28
David - correct, there are no gaskets between the shims and the backing plate (the shims and backing plate were reassembled correctly on the car). I was talking about the gasket that goes between the backing plate and the outer oil seal retainer. See the picture below. I then used gasket maker to replace the gasket that goes between the oil seal retainer and the oil guard.
I took pictures of every step of disassembly and double checked to make sure I was reassembling the correct way.
-Kevin
Attach file:
Outer oil seal retainer gasket.jpg (194.38 KB)![1059_606f268b72a44.jpg 975X1300 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1059_606f268b72a44.jpg)
Oil guard gasket.jpg (138.07 KB)![1059_606f2693bfcae.jpg 975X1300 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1059_606f2693bfcae.jpg)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=232310