Re: BigKev

Posted by BigKev On 2022/12/8 19:47:28

Howard there is a rubber boot that goes over that shifter. Steele sells them.

I'll have to get one of those.

I still need to fab up the upper panel which will cover the back of the engine where the firewall was cutnout to make it fit. It was pretty much just covered with insulation and fiberboard when I got thr car. I'll make a metal plate for it that is removable.

I bought one of those tools that crimps in rivet nuts. So I get those installed around the perimeter of that opening and give me something positive to attach to vs. a sheet metal screws that don't have much bite. Forming that 16ga metal panel with compound curves is going to a chore.

I need the panel removable to access the back side of those cam covers.