Re: BigKev
Posted by BigKev On 2023/1/31 9:59:18
Perfect, thanks for that Larry. The rivets came in yesterday. So if I can get the garage warm enough, I will get the inner fenders painted and give them a couple of days to cure, then I can try to get the rubber made up for them.
I'll have to alter the passenger side inner fender to clear the intake horn for the SU carbs. The lip on the outer fender had already been relief cut to provide spacing. So the inner fender will have to be altered as well. Perhaps I can make up a rubber piece to cover the needed relief cut to keep the tires from throwing road grime through that area.
You can see where the outer fender was already cut in this photo.
Attach file:
20230105_163214.jpg (142.89 KB)
I'll have to alter the passenger side inner fender to clear the intake horn for the SU carbs. The lip on the outer fender had already been relief cut to provide spacing. So the inner fender will have to be altered as well. Perhaps I can make up a rubber piece to cover the needed relief cut to keep the tires from throwing road grime through that area.
You can see where the outer fender was already cut in this photo.
Attach file:
20230105_163214.jpg (142.89 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=253351