Thanks guys! It's been fun so far.
Test mounted the last two door panels today and everything lines up great. I checked the springs and I think the small spring goes to the window regulator and the larger one goes to the door handle.
I test fit the regulator handle and the door handle with a retaining pin. The door handle for sure will not need a spring to give it tension. It was very difficult to get a pin in there. The regulator handle will need a spring. I'll go ahead and get the springs for all of them and then see if I need them all.
Lastly I picked up some frames and printed off some of my favorite Packard pictures to mount on my wall. I've got a few more to add, but currently there are a few of my favorite shots of the Panama, and one picture of my dad and grandfather in front of my dad's '38.
-Kevin
Attach file:
Door panel springs.jpg (131.67 KB)![1059_6434da5e95a85.jpg 1300X975 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1059_6434da5e95a85.jpg)
Door handle installed.jpg (105.46 KB)![1059_6434da7358c85.jpg 1300X975 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1059_6434da7358c85.jpg)
The Packard Wall.jpg (115.28 KB)![1059_6434da80b2ea4.jpg 1440X1920 px](https://packardinfo.com/xoops/html/uploads/newbb/thumbs/1059_6434da80b2ea4.jpg)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=255756