Re: The Duchess Project: 1940 Super 8 Convertible Sedan

Posted by Joe Santana On 2023/5/25 10:29:13

The ignition cable came out easily because the end, the coil cover, was modified to be removable. The inside center was pried up to separate it from the cable housing, then replaced adding a threaded hole for a screw to hold it from turning. There was no way I could jam anything more through that hole, so I cut the new ignition cable with a Dremel tool, attached the engine half of my old cable with a new wire and slipped a metal spacer sleave over the connection and clamped it.

Attach file:

---

  27CoilCapModified.jpg (118.51 KB)


  28spacerJoint.jpg (149.13 KB)