Re: Resurrecting a 1951 Henney-Packard Parts Car
Posted by Packard Don On 2023/7/19 21:31:29
A couple more things.
The oil filter assembly is large so probably specific to the Henney-Packard. Either that or it was added after the fact but either way I need to address its hoses.
I also have two cormorants for the car. One matches its patina while the other is NOS and I had planned on finally putting one of the on for it's first test run. However, with the lift lowered as it was, I decided to try on the old one and found that it's bent! I’m not sure if it can be straightened without breaking it or whether some slight heat might help.
EDIT: I just noticed that the oil filler cap appears to be trying to say something! Either that or it's laughing at me.
Attach file:
21407D8D-654B-4457-BD67-D58737CB6D97.jpeg (167.99 KB)
1204119F-3CBD-491B-AB69-074DA0D14C37.jpeg (163.77 KB)
The oil filter assembly is large so probably specific to the Henney-Packard. Either that or it was added after the fact but either way I need to address its hoses.
I also have two cormorants for the car. One matches its patina while the other is NOS and I had planned on finally putting one of the on for it's first test run. However, with the lift lowered as it was, I decided to try on the old one and found that it's bent! I’m not sure if it can be straightened without breaking it or whether some slight heat might help.
EDIT: I just noticed that the oil filler cap appears to be trying to say something! Either that or it's laughing at me.
Attach file:
21407D8D-654B-4457-BD67-D58737CB6D97.jpeg (167.99 KB)
1204119F-3CBD-491B-AB69-074DA0D14C37.jpeg (163.77 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=259457