Re: Stewart's 1955 Packard 400
Posted by Stewart Ballard On 2023/8/12 14:04:12
This is one of the front, power window regulators. This one has not been cleaned up yet but the other has.
I have been testing the clean one, with the motor, for a little while now.
It sticks as the coil adds tension. The motor is NOT the problem. There is no problem when the spring unwinds. My only guess is that the spring has some rusty grit and it is not moving smoothly so it gets stuck. I did not take it off and blast it as I am not sure how to get it back on.
Any suggestions would be appreciated.
Attach file:
20230812_144738_resized.jpg (262.18 KB)
I have been testing the clean one, with the motor, for a little while now.
It sticks as the coil adds tension. The motor is NOT the problem. There is no problem when the spring unwinds. My only guess is that the spring has some rusty grit and it is not moving smoothly so it gets stuck. I did not take it off and blast it as I am not sure how to get it back on.
Any suggestions would be appreciated.
Attach file:
20230812_144738_resized.jpg (262.18 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=260290