Re: BigKev's 1937 115-C Convertible Coupe

Posted by Bob J On 2023/11/8 16:02:55

Note, these are not oil impregnated bushings, but plain bushings with a grease groove cut into them in a helical spiral. There is no surface to accumulate filings, just a wash afterward with cleaner then greased after assembly. You just need to align the one bushing with the grease hole when pressing into the spindle to allow grease to fill the spiral cut. The instructions with the kit indicate they be reamed to fit. The OD of the bushing is a press fit to begin with so nothing has to be done to stop the bushing from spinning, no matter how fast you steer!
Bob J.