A little late in the response but I looked a little further into the rear end of the patrician. I did confirm it has the twin traction (removed the rear cover for inspection) and confirmed it has the 3.54 rear end ratio. So not to bad. I got the axle shafts in and torqued, however the air compressor is down at the moment so I wasnt able to fill the tires back up and didnt have the gasket on hand to install the rear cover. Hopefully those parts will be there when I get back this coming weekend.
next step is to work on the a/c I have a general idea where I am going to mount the drier. I also created a spread sheet with all the connections and what hose goes where, all I need is to take the measurements, find the ends I need on cold hose and get custom hoses made! pretty pumped about that.
then I just need to mount the thermostat, somehow wire everything, fix the horn, an alignment and I would say that about covers the winter work that needs completed!
Attach file:
IMG_2269.jpg (2,811.43 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=266261