Re: BigKev's 1937 115-C Convertible Coupe

Posted by BigKev On 2024/1/31 9:09:40
How is the factory fuel line routed from the engine to the tank. The cobbled together fuel line is currently running down the inside of frame rail. But there is evidence of tubing clamps on the outside of frame rail.

If it supposed to go on the outside, where does it cross back over to the tank and the engine. I'd actually prefer to move it to the outside as it very close to the exhaust routing at the moment.

This is probably my next project while the front fenders are off the car.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=267410