Re: BigKev's 1937 115-C Convertible Coupe
Posted by ElGroucho On 2024/2/5 18:32:08
Quote:
Kevin,
I used a sewing tape to better sit against the slight curvature of the fender and I did confirm with my Stanley FatMax that the measurements aligned. I'm getting about 12" from bottom of the fender peak to the bottom of the rear light.
Attach file:
20240205_151015.jpg (1,938.77 KB)
BigKev wrote:
Can someone with '37 115/120 Convertible or Coupe give me the measurement of the from the back bottom edge of the fender to bottom back edge of the tail light base, along the fender peak?
The replacement fenders I got are from a sedan and do not have the hole drilled. I can't just the measurements from my old fenders since they were altered.
Kevin,
I used a sewing tape to better sit against the slight curvature of the fender and I did confirm with my Stanley FatMax that the measurements aligned. I'm getting about 12" from bottom of the fender peak to the bottom of the rear light.
Attach file:
20240205_151015.jpg (1,938.77 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=267545