On mine it was a matter of heating up the end with a soldering iron to melt the solder joint that held the brass cap onto the Bakelite insulator, then I threaded the new wire through the assembly and re-soldered it together. Bob J.
Attach file:
old lamp socket.jpg (24.67 KB)
high beam bulb holder-5.JPG (898.29 KB)
high beam bulb holder-4.JPG (773.02 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269151