Today I tackled the heater. Broke it down to the parts and painted. Going to need to look into the wiring to see where it hooks up too. I still have the wires from the heater so I have the starting point.
Got the headlight stanchions removed. Probably easier to remove when the car is jacked and tires removed. Found out as well that I indeed do have sealed beams. Called YnZ and they are shipping the adaptors.
Couple of questions on other items:
1. The front seat floor board. Is this just a 3/4” plywood. And the. Use the heat resistant tape as BigKev suggested for the toe Board?
2. I have this switch but when I removed it was not hooked into anything so I am not sure what it is for? It is the switch all the way to the right on the dash picture down left from the cigar lighter. And second picture is a close up of the switch.
Thanks in advance!
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=269440