Re: 1937 120 Conv. Sedan - Blanche

Posted by 37Blanche On 2024/4/6 11:45:04

Back to the wiring. So I am testing each terminal for voltage to see if I can find where things are not flowing.

Getting hot reads on:
Both sides of ammeter
Both sides of ignition switch
Horn relay
Solenoid start switch for the opposite ends of horn relay and ammeter
Battery terminal for voltage regulator
All 3 terminals in the two way lamp switch


Where I am not getting a hot read
Passenger side of the starter button and opposite end where it connects to the solenoid starter
“F” “G” “A” on the voltage regulator
And same on the generator.

1. I would think the horn would work since I have voltage at all points and solid connection at horn button
2. I tested on positive and negative on all spots where I did not get a hot read
3. Everything worked prior to my wiring adventure. I did not touch move or change the regulator.

Is there a “reset” for the regulator? Or something else I need to do there? Pierre is hitting it at the one terminal it is just not flowing to the other terminals?

As far as the starter button to solenoid starter. Is there something in that connection that needs to be triggered?

Thoughts appreciated!
Ben