Re: 1937 120 Conv. Sedan - Blanche

Posted by 37Blanche On 2024/4/8 7:03:09

Thanks Txgoat. So I confirmed with Flackmaster that it will "hover below the frame, and then up and over the axle....." Not sure if yours is the original style with a resonator. As I mentioned, when i removed my old one is is as you described and serpentine through the X frame. I was expecting same, but the design from Waldrons, who builds to "original specs", does not allow that. The muffler is in in the wide part of the X, and then the resonator is on the other side of the frame, as you move towards the back, where it attaches to the tailpipe, and loops over axle and under the Tank. It never hangs lower than any other part/pipe, its just not tucked away.

I will update as I continue and will provide some pictures as well.