Re: Don’s 1937 (120) 138CD Deluxe Touring Limo
Posted by Don B On 2024/4/13 18:17:41
Okay…I am yielding for today. Getting the front seat out is not easy. Here is where I’m at:
1. There are six small screws in the metal frame at the front that have to be removed - DONE
2. There are two long wood screws on each side that have to be removed - DONE
3. There are four shorter wood screws that are horizontal in the back of the frame to be removed - DONE
4. On each rear corner, there are four wood screws to be removed - Driver’s side is DONE. Passenger side has one that won’t budge.
5. Those are all of the screws I can see and the frame has loosened up a bit, but it must be anchored somewhere else still. Otherwise, I should be able to jostle it around a bit by now.
Any ideas?
This picture shows the four screws on the driver’s side. Mirror image for the passenger side. I have one that i can’t get to budge on the passenger side.
1. There are six small screws in the metal frame at the front that have to be removed - DONE
2. There are two long wood screws on each side that have to be removed - DONE
3. There are four shorter wood screws that are horizontal in the back of the frame to be removed - DONE
4. On each rear corner, there are four wood screws to be removed - Driver’s side is DONE. Passenger side has one that won’t budge.
5. Those are all of the screws I can see and the frame has loosened up a bit, but it must be anchored somewhere else still. Otherwise, I should be able to jostle it around a bit by now.
Any ideas?
This picture shows the four screws on the driver’s side. Mirror image for the passenger side. I have one that i can’t get to budge on the passenger side.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=270236