Re: Don’s 1937 (120) 138CD Deluxe Touring Limo

Posted by Don B On 2024/4/30 10:43:45
Quote:

TxGoat wrote:
The '37 120 service literature outlines a procedure for removing the front clip as a unit, listing all bolts and clips and so forth to be removed, and showing the recommended lifting point if a hoist is used. Two people could do it, but 2 people and a hoist would be much preferred. I person and a hoist could do it. If you have good paint and straight sheet metal, then towels, tape, good lighting, and patience would be needed. Force should not be needed. If unbolted parts do not move easily, find out why before proceeding. Some pool noodles or pipe insulation foam might also prove useful.



Thanks, I’ll look that up. I’m pretty optimistic now. I can’t say that I was a couple days ago. I don’t have access to a hoist, but I do have access to three 25-30 year olds. I think the four of us should be able to handle it. I’l put the two strong guys at the front. Then me and the other can help guide the fenders.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=270944