Re: 1937 120 Conv. Sedan - Blanche
Posted by BigKev On 2024/5/12 7:04:06
I'm running my gauge on negative ground, and it works fine. So I don't think polarity is the issue.
I'd look at the fuel gauge troubleshooting chart. It goes through a few different scenarios. It the tank ground is missing it goes to hard empty I belive. But if it's shorted it goes to hard full.
Some problems can be between the gauge/sender/tank and some internal the gauge itself.
Also make sure the gauge itself is grounded to the dash. New paint makes a wondeful insulator.
I'd look at the fuel gauge troubleshooting chart. It goes through a few different scenarios. It the tank ground is missing it goes to hard empty I belive. But if it's shorted it goes to hard full.
Some problems can be between the gauge/sender/tank and some internal the gauge itself.
Also make sure the gauge itself is grounded to the dash. New paint makes a wondeful insulator.
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=271457