Re: 1937 120 Conv. Sedan - Blanche

Posted by 37Blanche On 2024/5/13 14:06:52
Thx TxGoat. So the gas gauge does have power going into it on the Passenger side terminal from the ignition switch. And I get a hot read there. I tested the Gas Gauge with an Ohm reader and it shows activity when touching both sides after removing the wires. Since the Gauge is getting power in, should this in turn be showing power "out" through the Sender wire? Key is turned to on position.

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=271526