Re: Stewart's 1955 Packard 400
Posted by humanpotatohybrid On 2024/5/18 19:24:34
Quote:
The parts book gives these as Pan Head Self Tappers, #8 x 3/8". In other words these, except these are 1 inch.
The question is whether I can make it look good as you can see the alignment is not perfect and there is NO play in the mounting studs on this one.
Attach file:
20240518_202339.jpg (7,418.87 KB)
Stewart Ballard wrote:
I am not going to be able to help with that small piece of reynolds wrap as I have the same problem. I think I probably put body filler over mine as well. I asked about it here several months ago but never got a response.
The parts book gives these as Pan Head Self Tappers, #8 x 3/8". In other words these, except these are 1 inch.
The question is whether I can make it look good as you can see the alignment is not perfect and there is NO play in the mounting studs on this one.
Attach file:
20240518_202339.jpg (7,418.87 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=271744