Re: Randy Berger's 1956 Caribbean

Posted by Randy Berger On 2009/6/30 4:23:50

I finally got my taillights in. I found a strange problem and remembered I had the same problem on the 400. There are two screws (#10-12 X 7/8) at the top of each casting that screw into the rear quarter. On the inside of the quarter panel is a small hole that accepts that screw, but on the outside is punched a square hole that looks like it should take a small well-nut. I patiently finagled a push-clip from the inside and got the screw in. I used a plastic license plate insert for the other side but it does not line up very well.

Attach file:

---

  (80.30 KB)