Re: 49 standard 8 touring

Posted by HH56 On 2009/10/18 21:02:01

Would start with the usual guys. Kanter, Max Merritt, Tuscon Packard, Mike Dulinski, or David Moe at Seattle Packard. Believe they are in the Packard Directory. There are several who post here also that might have something. Turbopackman or Packards1 or Craig might be able to help.


EDIT: Was thinking that if nothing bent, instead of replacing if that becomes an issue, it might be possible to place the drum back on the assembly and hit it with a small weld at each of the ground off rivets to restore to normal. Others with some experience in metal working might say if that is a possibility without distorting it.