Re: Keegan's 55 Clipper Deluxe
Posted by Keegan Chaput On 2010/2/5 22:59:15
I should have used my free time to work on my taxes today. Meeting with the accountant next Tuesday. Somehow I just couldn't bring myself to do it. Had to keep working on the Clipper. At least I can measure my progress with the car. Taxes and bookwork never seem to come to any measurable end.
I welded in the new brace and the seat brace as well. Then I started to make some replacement panels for the floor. I've found that my limited skills are best used to make smaller panels and fit them together. Rather than a large panel that covers it all at once.
With the help of many clamps to hold it all tight together, I was able to cover up about half of the floor that I've removed. The large missing section will get covered by the floor pan that I purchased online. Once that one is in I'll move to the toe board.
Attach file:
(123.10 KB)
(107.13 KB)
(101.68 KB)
I welded in the new brace and the seat brace as well. Then I started to make some replacement panels for the floor. I've found that my limited skills are best used to make smaller panels and fit them together. Rather than a large panel that covers it all at once.
With the help of many clamps to hold it all tight together, I was able to cover up about half of the floor that I've removed. The large missing section will get covered by the floor pan that I purchased online. Once that one is in I'll move to the toe board.
Attach file:
(123.10 KB)
(107.13 KB)
(101.68 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=46587