Re: Peterson's 1940 Packard
Posted by West Peterson On 2010/3/5 14:59:49
19. Liberally apply grease to the old thrust bearing and spacer. This holds them into place while the spindle is slid in.
20. Grease the kin pin itself before carefully tapping it into place through the axle spindle...
21. carefully aligning the notch into position with the lock-pin bore.
Attach file:
(49.63 KB) (58.83 KB) (84.19 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=48682