Re: Henry's 55 Constellation
Posted by Cli55er On 2010/9/9 9:13:19
started fiddling with the waterpump a bit. that plastic impellar didn't last long while trying to get things to come loose. better it come apart there then in my motor though. i ordered an NOS one from Packards1 off ebay for cheap! so no biggie there.
i did notice that the metal press on sleave for the impellar stayed behind.....gonna be a chore getting all that apart. i am trying to just get the rebuild kit instead of the whole pump to save me some money. we'll see how that goes.
i am guessing the impellar comes off, preferably with the nurrelled sleeve, and then you can press out the pump shaft towards the front of the pump? the repair manual says nothing i can see about how to rebuild these units. just gives a schematic of what is inside.
enjoy,
Hank
Attach file:
(209.43 KB)
(199.50 KB)
i did notice that the metal press on sleave for the impellar stayed behind.....gonna be a chore getting all that apart. i am trying to just get the rebuild kit instead of the whole pump to save me some money. we'll see how that goes.
i am guessing the impellar comes off, preferably with the nurrelled sleeve, and then you can press out the pump shaft towards the front of the pump? the repair manual says nothing i can see about how to rebuild these units. just gives a schematic of what is inside.
enjoy,
Hank
Attach file:
(209.43 KB)
(199.50 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=59623