Re: 51Packard's....51 Packard

Posted by HH56 On 2010/10/24 17:11:40
The black thing is a connector. There are two types. This one looks like the tab type with approx 5/16" wide tabs on the wires. The other type uses round bullet connectors. Those usually pull out but sometimes takes a bit of effort. If this is tabs, approx in the middle of the tab is a small hole which captures a tiny pin or tang which is part of the mating connector contact. I don't remember which side it is on but pushing wire in and opposite the tang may release it, otherwise a tiny screwdriver on one side or the other will push the tab away from the pin. You still may have to push in on the wire slightly while doing it but once released, wire will pull out.

Attach file:



jpg  (2.33 KB)
209_4cc4af18c8e23.jpg 95X73 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=62769