Re: Keegan's 55 Clipper Deluxe

Posted by Keegan Chaput On 2010/10/26 23:00:10

not being able to work more than 30 minutes a day is frustrating. I got a little further on the new body mount. I welded up the mount and used sheet metal screws to test fit it on the car.

Now I need to mark and drill the mounting hole and weld in the reinforcing sleeve. Then I should be able to spot weld it back on the car.

When I took the original off, it was only held loosely with two spot welds. I think I'll use a little more this time around.

Also, sorry for the poor quality pictures. Been using the cell phone. Apparently this thing only takes good pictures when there's a ton of light. I'll be switching back to the Nikon when available.

Attach file:

---

  (121.20 KB)


  (122.99 KB)