Re: BigKev's 1954 Packard Clipper Deluxe Sedan

Posted by BigKev On 2011/4/3 21:59:14

Replaced the rear muffler bracket this weekend. To replace it you have to from the muffler frame support. This is i realized the part that Max Merritt sent me was not made correctly. The metal bottom portion of the bracket was made too wide, and because of that it would not fit into the frame support correctly. So I had to use an angle grinder down the base of the bracket until it fit. Then I remounted it.

The we were away this weekend. Came back around noon, an checked everything out on the car, and then drove it a local cruise night. Only Packard there.

Attach file:

---

  (114.28 KB)


  (77.49 KB)


  (124.19 KB)


  (138.28 KB)


  (153.13 KB)


  (110.31 KB)