Re: Ken's 1937 115C Touring Sedan
Posted by Ken_P On 2011/6/25 21:37:57
Quite a bit of work done on the car.
Reassembled the front suspension.
Rebuilt the center steering arm.
Rebuilt the front brakes.
Built four of the six new hard brake lines today.
Oh yeah, and I picked up AL's 1955 Packard Patrician today.
Lots of work has happened, but there isn't a lot to say. A lot of thread chasing, painting, and putting together.
I'm taking the rear axle,driveline, front motor mount, and intake/exhaust manifolds for sandblasting Monday. The rear axle is currently fully assembled, with brake drums and all, and I'm going to get the main assembly sandblasted. After that, I'll disassemble the rear, rebuild the brakes, and then put everything back together again.
Attach file:
(74.78 KB)
(112.04 KB)
(109.20 KB)
(97.75 KB)
(96.90 KB)
(127.26 KB)
(164.59 KB)
(124.04 KB)
Reassembled the front suspension.
Rebuilt the center steering arm.
Rebuilt the front brakes.
Built four of the six new hard brake lines today.
Oh yeah, and I picked up AL's 1955 Packard Patrician today.
Lots of work has happened, but there isn't a lot to say. A lot of thread chasing, painting, and putting together.
I'm taking the rear axle,driveline, front motor mount, and intake/exhaust manifolds for sandblasting Monday. The rear axle is currently fully assembled, with brake drums and all, and I'm going to get the main assembly sandblasted. After that, I'll disassemble the rear, rebuild the brakes, and then put everything back together again.
Attach file:
(74.78 KB)
(112.04 KB)
(109.20 KB)
(97.75 KB)
(96.90 KB)
(127.26 KB)
(164.59 KB)
(124.04 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=80328