Re: Henry's 55 Constellation

Posted by Cli55er On 2011/7/31 21:22:27

sorry those images were to big. i'm just going to rebuild it. didn't get much help, so thats what i'm going to do.

i worked on the motor some more this weekend. tried fitting the pins. the first one was really hard would not go by hand in the rod. had to press it. shavings of bronze came out. i'm worried that one is crap now. actually pretty upset.

the next one went by hand fine. then the next one would not go by hand so i left it be for now till i could ask you guys.

see this link for my questions also.

https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?topic_id=7745&post_id=82736#forumpost82736

bought new 12 ton press. those shavings are from the rod pin bushing. i'm sure it is screwed and i will be delayed more and have to spend more money.

if you can tell me what is wrong with the first picture...you get nothing cause i have nothing. and yes i took them out before i installed the cam retaining plate.

also they put in freeze plugs and i didn't ask them too, so they took that charge off. cause they put in 1 3/4 and it supposed to be 1 59/64 size plug, but i may leave them in there as it looks like they sealed them...i'm not sure. i probably should knock them out.


Hank

Attach file:

---

  (135.86 KB)


  (122.85 KB)


  (120.89 KB)


  (129.80 KB)


  (154.12 KB)


  (115.87 KB)


  (142.25 KB)


  (115.21 KB)


  (134.30 KB)


  (129.89 KB)


  (133.23 KB)


  (102.36 KB)


  (134.96 KB)


  (127.41 KB)


  (114.78 KB)


  (115.73 KB)


  (118.12 KB)


  (115.32 KB)


  (129.57 KB)


  (113.27 KB)


  (125.96 KB)


  (124.76 KB)