Re: 51Packard's....51 Packard
Posted by BigKev On 2011/8/4 16:14:48
My pump has hose connections, and not threaded connections. None of the metal tubing is barbed. Just hose slipped over the end, no clamps or clips either.
Here are a couple of pics when I first started taking the car apart. You can see the lines and rubber hoses. I don't have any post assemble pics of the vacuum lines. But the hard line on the firewall is held in place with the smaller line clamp screwed into the firewall. If needed I can take some some pics of what it looks like on my car now.
Attach file:
(121.58 KB)
(109.42 KB)
Here are a couple of pics when I first started taking the car apart. You can see the lines and rubber hoses. I don't have any post assemble pics of the vacuum lines. But the hard line on the firewall is held in place with the smaller line clamp screwed into the firewall. If needed I can take some some pics of what it looks like on my car now.
Attach file:
(121.58 KB)
(109.42 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=83083