Re: Henry's 55 Constellation
Posted by Cli55er On 2011/8/8 8:57:10
weekend work.
lubed up the cam lobes, soaked the lifters and put them in. i got one lifter that is stuck, but i have it soaking in PB blaster. don't want to install that and bend something, so i'll get it free again.
installed the pistons also and sent off the rods/pins to Jack for machine work.
now if my main/rod bearings would just come in i could get the crank in.
Hank
Attach file:
(117.36 KB)
(100.26 KB)
(90.36 KB)
(94.68 KB)
lubed up the cam lobes, soaked the lifters and put them in. i got one lifter that is stuck, but i have it soaking in PB blaster. don't want to install that and bend something, so i'll get it free again.
installed the pistons also and sent off the rods/pins to Jack for machine work.
now if my main/rod bearings would just come in i could get the crank in.
Hank
Attach file:
(117.36 KB)
(100.26 KB)
(90.36 KB)
(94.68 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=83366