Re: Henry's 55 Constellation

Posted by Cli55er On 2011/8/30 19:12:56

Took off all main caps, turns freely. Put caps back on one at a time and hand tighten, when I do that....no turn. Did it one cap at a time leaving off the other four... Hand tighten that one cap... Won't turn.

Dad is coming and we will plastigauge. Something isn't right. Bearings are marked .010 and jack says crank was done .010 also. So not sure what is happening.

Front of crank is marked with white marker... 010 and 010.... I'm guessing rod/main turned 010