Re: Henry's 55 Constellation

Posted by Cli55er On 2011/9/16 13:13:03

yeah i do see the rotor kits are available (not sure of NOS status or not). i will check the rotor specs vs what the manual says they should be for sure.

the bushing look to be good, but the outer rotors bearing looks to have some wear on it and some blackening in spot like it got hot.

i think the reason there is no part number for the bearings is because Packard expected it to be replaced as a unit if they were bad, so there are no individual part numbers for them.

i'll probably see if the vendor has a non-worn rotor shaft, but if not i'll reuse the old one as there is no sealing going on there.

and yes it says Eaton on the side of the main body of the pump.

thanks Howard,

Hank