Re: Todds 1930 733 7P Sedan

Posted by tfee On 2011/9/19 15:59:04
One of the first projects was to get the engine out and to a rebuilder. I wanted to know exactly what I was in for so I took the engine apart in the garage to see what I had to work with. The cyclinders were .016" oversize and also tapered .010", the cam has actual grooves cut in it from the tappet arm bearings and it had two valves seized in it. This engine was run in to the ground, I can only imagine the clouds of white smoke that accompanied this car wherever it drove.

Attach file:



jpg  (101.91 KB)
2666_4e77ad04a1b73.jpg 1024X683 px

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=86303