Re: Henry's 55 Constellation

Posted by JWL On 2011/9/29 8:50:15
Quote:

PackardV8 wrote:
" show how close the dip stick end gets to the oil pump pick-up float"

I don't think that is possible unless a piston is left out. The only way i discovered it was using a mock-up block/pump.

Otherwise, look for an etched mark from end of dip stick on the top of the float.


Keith, I was picturing Henry inserting the dip stick in its holding tube, and with the pan off and the oil pump installed, one could see the end of the dip stick and its proximity to the top of the pick up float. Is this incorrect?

(o[]o)

This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=87027