Re: 1940 Super 8 160 Model 1803 Project

Posted by BigKev On 2011/10/2 10:02:19

Jim, wow what a struggle with that exhaust. I guess I lucked out with mine, or all the 51-54s are so similar that it's hard to screw them up.

Only thing wrong with mine was that one holder tab welded onto the bottom of the head pipe was locate 90 degrees off center. This did matter as the pipe that was getting replaced used a clamp style retainer, so I just reused that.

Can't wait to see the '40 with the front clip back on.