Re: BigKev's 1954 Packard Clipper Deluxe Sedan

Posted by BigKev On 2012/4/9 12:56:32

From what I gather.... You install the two lower screws just loose enough so the roof bracket can "key" in to them. Then the entire visor and roof bracket is assembled off the car, and then "hung" on those two lower screws which are hidden/inaccessible by the visor body when installed. Then the top screws are installed to lock it in place. The side brackets appear to be similar with keyed holes, and a cover piece. Also I believe there is a thin rubber pad that goes between the roof bracket and the roof as a seal.