Re: GearRat's '52

Posted by HH56 On 2014/2/5 13:32:39

Just my two cents but if it's just the one cylinder I'd look for a defective or problem cylinder or pinched/blocked tube going to that cylinder. If it's more than one then I'd look at the pedal action at master.

Make sure the free play is good or if the pedal is fully retracting so the bleed or relief port(s) is being uncovered when the pedal is released. I believe you converted to the MPB system so with the pedal mods, I'd verify that arrangement and that the pedal weight is not keeping the master piston slightly in.