Re: RIk's 56 ultramatic

Posted by R H On 2021/3/19 22:55:02

A.c..

Took top off. The Packard top goes over it.

Yes 1/4-20. Picked up rod from Gerry. Threaded it down farther . about 2 inches.

So will have wing nut supplied filter on first.

Then another nut with a fender washer. Top will rest against it to give top wing nut something to tighten to.

I'm still having idle problems. Carb is off.

If it's not the carb. Then my delta CD. Might of gave up...