Re: RIk
Posted by R H On 2021/3/28 0:07:48
Can't swap in car. Cause you need to remove rivets holding contact plate.
Contacts plate no. 2-56 screws.
Finally have wiring done. Just need to wrap wires in the middle. Then once in housing route the wires.
Add another piece of insulation over solder joints.
Attach file:
20210327_180930.jpg (175.89 KB)
20210327_180950.jpg (196.33 KB)
20210327_215535.jpg (254.13 KB)
Contacts plate no. 2-56 screws.
Finally have wiring done. Just need to wrap wires in the middle. Then once in housing route the wires.
Add another piece of insulation over solder joints.
Attach file:
20210327_180930.jpg (175.89 KB)
20210327_180950.jpg (196.33 KB)
20210327_215535.jpg (254.13 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=231778