My plan is to put diode on hot wire. With possible capacitor.
Because there is still going to be a chance for a spike with the relay contacts.
And a capacitor across those points might help.
Not going to remove ballast resistor ..
Going to hook this up. So ign switch flips relay and power igniter .12v. Thru relay .
Still thinking where to get 12v for igniter. And add diode.
Could do it all from ignition side of ballast. Which would be off when key is off.
Attach file:
4472001 (2).pdf Size: 367.63 KB; Hits: 147
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=232536