After 6 plus years these flexane. Held up.
Put NOS. Back on left side. Right side still have the bushings I made with flexane.
on right side
Not sure if I over tighten. Right side is torqued to 115. I think.
These I just put on. Are not torqued.
The way I removed them . 3 jacks.
One for axle. Floor jack
One for torque arm. Floor jack
One for under shock mount. Bottle jack.. Didn't remove shock. Would be easier with it off the shock mount.
And hammer to smack down U bolt.
The frame on jack stands.
The smooth on. White. Crumbled when I tighten them. So put on the NOS bushings I have
Till I make more flexane bushings.
Attach file:
20211016_173558.jpg (285.88 KB) 20211016_173619.jpg (180.25 KB) 20211016_173626.jpg (244.86 KB) 20211016_171218.jpg (344.11 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=237835