Alright
So changed set up.
Put spacer on. No squeak . drove it.
Got home squeak.
So my take is. Bushings are to tight.
One picture is my dads.
Other is mine. So that bolt. The non threaded part is 1-3/4.
So I was going to leave it. Out I threaded it down to 1-1/2.
Which I think is too tight. Well its has to be. They are squeaking.
Also my dads does not have these large washers.
At first. It was real free. Its would go up and down. Spring back.
But a washer between plates. And that gave me a gap. Both sides.
But. It needs more..
So got to pull it and modify it.
But going to use a Vernier and measure my dads .
Now its tight again.
Attach file:
20220808_175237.jpg (465.29 KB) 20220808_134017.jpg (425.13 KB)
This Post was from: https://packardinfo.com/xoops/html/modules/newbb/viewtopic.php?post_id=246963